Maintenance Tips to Keep Your Mountain Bike Mechanically Sound
Take care of your mountain bike full suspension or semi-rigid can be very simple and also increase the mechanical life. Below is a guide that will be any way to help keep your bike in good mechanical condition. Once you execute this maintenance plan and become familiar with the process, it should take no more than 20 minutes. Start: Steps: Remove all accessories (lights, bells, etc.) on top of the handlebar. Turn the bike upside down so you can remove the wheels and inspect the drive train. Carefully remove the front wheel and rear to give more room to work on the bike. Clean the chain of transmission (gears, chains, and crank) with a brush and soapy water. Also use a damp cloth with soap on the chain and rear derailleur. Do their best to clean all moving parts. After cleaning the components of the bicycle be sure to dry thoroughly with a towel so it does not rust. Wash the bottom of the frame and front fork, the bicycle and to ensure that all moving parts are free of debris. Wash the front and rear wheels when cleaning the rim, the spokes and cassette. Then, put the wheels back on the bike. After giving each spin the rear wheel on the bike to ensure that the wheels are true and not rub on the brake components. If the wheels are not true and / or components of friction brake to make the necessary changes. After your system is back in place, turn the pedals to check the transmission chain. Make sure your bike pedals smoothly. If you hear strange noises coming from your wheel bearings continue the investigation. Turn your bike right on it and wash the top. Remember to dry your bike. Check your front and rear brakes and make the necessary adjustments. If the inspection apply the front and rear shocks. Make sure they are in good condition. Lubricate well you drive train (chain, ring, crank and derailleurs) with the recommended oil. Apply the oil while moving the pedals in both directions to ensure that the components are well lubricated. Finally attach any accessory that you removed in step one. The steps listed above will help you keep your bike in good condition and also help you prepare for your next race. If any mechanical malfunction is detected during the process to ensure that it is addressed. Your local bike shop that sells mountain bikes for sale and bike parts, you can help to replace a component if you need further assistance. Visit runway
